Accesorios para paneles de instrumentos

Wingflex A320 Combo Cube places the Airbus glareshield essentials into one tidy desktop system, combining EFIS, FCU and multifunction RMP controls with high-contrast dual-colour displays. The knobs click and turn with enough purpose to make heading changes, radio tuning and barometric adjustments feel far better than poking at a virtual cockpit. USB connectivity keeps installation straightforward, while the 13-degree viewing angle brings the panels naturally into sight. It is compact Airbus hardware for pilots whose desks already resemble a mildly concerned electronics workshop. What Sets the Wingflex A320 Combo Cube apart? Three Core Panels Without a Full-Size Glareshield The bundle combines an EFIS, FCU and RMP-based multifunction panel in an 80% scale layout, saving roughly eleven centimetres compared with a full-size arrangement. Reviewers have praised that reduction because it preserves practical control spacing while fitting more comfortably beneath ordinary monitors. The result feels substantial enough for deliberate operation without demanding the sort of desk usually reserved for air-traffic control or an exceptionally ambitious accountant. A Smarter Use of the Right-Hand Position Instead of supplying a second EFIS that a solo pilot may rarely touch, Wingflex fills the right side with a four-in-one panel covering radio management, transponder, TCAS and warning functions. Review feedback identifies this as one of the bundle’s most practical decisions, since it places genuinely useful controls within reach. It sacrifices strict two-seat symmetry, but gains considerably more day-to-day function for single-pilot desktop flying. Clear Displays and Cohesive Night Lighting Dual-colour screens provide sharp contrast against their dark backgrounds, while synchronized brightness allows the EFIS, FCU and RMP sections to behave like one connected panel. Independent testing found the displays notably crisp and the backlighting pleasant in darker rooms. That matters during evening approaches, when deciphering fuzzy digits is an unnecessary challenge and the weather already has enough creative ways to ruin a carefully prepared arrival. Simple Assembly With a Stable Optional Console When paired with the Cube Stand, the three modules connect through internal USB-C cables and a built-in hub, leaving a single cable running to the PC. Reviewers found assembly straightforward and noted that the broad base remained firmly planted while pressing buttons and turning encoders. The stand also gives the separate modules a cleaner, unified appearance, although it is an optional bundle choice rather than standard equipment with every configuration. Pros and Cons Pros Cons Compact layout preserves valuable desktop space. Reduced scale differs from full-size cockpit dimensions. Three modules cover major glareshield functions. Optional console increases the complete setup footprint. Dual-colour displays remain clear in low light. RMP module combines four useful control sections. USB installation requires minimal external interface hardware. Specifications Specification Value Product Wingflex A320 Combo Cube Included Modules A320 EFIS Cube, A320 FCU Cube and A320 RMP Combo Cube Scale 80% scale Interface USB Installation Plug-and-play Display Type Dual-colour LCD screens Viewing Angle 13 degrees FCU Construction Aluminium body and knobs RMP Functions RMP, ATC, TCAS and side-panel controls Lighting Synchronized brightness across compatible Cube modules Product Dimensions 52.0 × 18.5 × 16.5 cm Package Dimensions 64.0 × 24.0 × 20.5 cm Bundle Options Three-module bundle, or bundle with Cube Stand Glareshield Housing Not included with the standard three-module bundle Wingflex A320 Combo Cube Compatibility Simulator Aircraft With Full Bundle Support Microsoft Flight Simulator Fenix A3xx, FSLabs A32x, FlyByWire A320, iniBuilds A320, A321, A330 and A340, Aerosoft A340, Headwind A330 X-Plane ToLiss A319, A320, A330 and A340; Laminar A330 Prepar3D FSLabs A32x and other listed aircraft where supported through Wingflex Bridge Aircraft Compatibility Limitation FlyByWire A380 EFIS and FCU supported; RMP Combo Cube not supported iniBuilds A350 EFIS and FCU supported; RMP Combo Cube not supported The three modules connect through USB and can operate as separate desktop units or within the optional Cube Stand. That stand contains an internal USB hub, allowing its three module connections to exit through one PC cable. The bundle pairs naturally with Airbus throttles, sidesticks, MCDUs and overhead panels, but it does not include a full glareshield enclosure and no standard mounting compatibility with third-party cockpit shells is specified. Full compatibility depends on all three modules supporting the selected aircraft, because the EFIS and FCU lists are slightly broader than the RMP list. The complete bundle supports Fenix, ToLiss, FlyByWire A320, FSLabs, several iniBuilds aircraft, Aerosoft A340 and Headwind A330. The FlyByWire A380 and iniBuilds A350 are not fully supported because their RMP integration is currently excluded, even though the EFIS and FCU modules list them individually. For software platforms, the Combo Cube is built for Microsoft Flight Simulator 2020 and 2024, X-Plane 11 and 12 and Prepar3D on Windows PC. It uses Wingflex Bridge for aircraft communication and firmware management. It is not listed as compatible with Xbox or PlayStation, because the required PC-side integration software and dedicated USB panel support are not available on those console platforms.

Leer Más Menos

¡Atención! ¡El envío de este artículo puede tardar entre 7 y 10 días laborables! El Wingflex B777 CDU lleva la gestión de vuelo de largo recorrido a una interfaz física dedicada, combinando una construcción a escala real 1:1 con conectividad USB plug-and-play. El teclado retroiluminado con diseño inspirado en la aeronave hace que la introducción de rutas, los cálculos de rendimiento y los cambios en la llegada resulten precisos y satisfactorios, mientras que la carcasa delgada evita ocupar medio escritorio. La selección física entre la posición del comandante y la del primer oficial aporta una gran flexibilidad, y el soporte ajustable mantiene la pantalla perfectamente visible desde distintas posiciones de asiento. Es una solución mucho más convincente que pelearse con una diminuta ventana emergente en plena fase de crucero o justo antes del servicio a bordo. ¿Qué hace destacar al Wingflex B777 CDU? Controles a escala real para auténticos procedimientos Boeing El diseño 1:1 conserva el espaciado, la disposición de las teclas y las proporciones propias de un CDU del Boeing 777. Esto facilita tareas habituales como introducir rutas, configurar el rendimiento o modificar procedimientos de llegada utilizando la memoria muscular. Los análisis independientes también muestran que la unidad ofrece la sensación de un auténtico panel de control de escritorio y no de un teclado reducido, algo que agradecerán los pilotos cansados de apuntar con el ratón a diminutos botones virtuales. Amplia compatibilidad más allá del Boeing 777 Aunque el panel frontal y la lógica de funcionamiento están claramente orientados al B777, la unidad también es compatible con aeronaves de PMDG, iFly, Zibo, LevelUp e IXEG. Esto incluye varias variantes del 737 y el PMDG 747 V2, además de la familia 777 compatible. Esta integración más amplia ofrece un mayor valor a los aficionados de Boeing, aunque los textos y el diseño físico siguen estando optimizados principalmente para el 777. Una sola unidad para cualquiera de los dos asientos del cockpit La selección física entre los lados izquierdo y derecho permite que el CDU represente tanto la posición del comandante como la del primer oficial sin necesidad de adquirir una segunda unidad. Esto resulta especialmente útil en cabinas domésticas compactas, estaciones de entrenamiento compartidas y configuraciones de escritorio donde el espacio desaparece más rápido que el combustible durante una desviación mal planificada. El soporte ajustable con múltiples ángulos aumenta aún más la flexibilidad, permitiendo colocar la pantalla debajo del monitor, junto al cuadrante de potencia o integrada en un cockpit en desarrollo. Diseñado para el escritorio sin complicados proyectos de cableado La interfaz USB integra la pantalla y los controles físicos en una única unidad, eliminando la necesidad de placas controladoras independientes, conexiones de vídeo y cableado personalizado habituales en componentes de cabina más complejos. Su peso de 1,25 kg proporciona la estabilidad necesaria para introducir datos cómodamente, mientras que su diseño delgado facilita el transporte. Los vídeos de análisis también muestran un montaje sencillo del soporte y un funcionamiento sin complicaciones con Microsoft Flight Simulator, convirtiéndolo en una excelente opción para quienes prefieren volar antes que organizar cables. Ventajas y desventajas Ventajas Desventajas Teclado a escala real compatible con los procedimientos habituales del Flight Management de Boeing. El diseño físico está específicamente adaptado a aeronaves Boeing. Las teclas retroiluminadas facilitan el uso en cabinas con poca iluminación. La compatibilidad se limita a los paquetes de aeronaves expresamente compatibles. Selector físico para alternar entre comandante y primer oficial. El soporte ajustable ofrece varias posiciones de visualización prácticas. La conexión USB reduce la necesidad de hardware de interfaz adicional. Especificaciones Especificación Valor Producto Wingflex B777 CDU Tipo de aeronave Boeing 777 Control Display Unit Escala Escala real 1:1 Construcción Materiales de calidad aeronáutica Interfaz USB Instalación Diseño plug-and-play Teclado Estructura interna con diseño de aeronave y retroiluminación Comportamiento de entrada Retardo aleatorio de entrada configurable Selección de posición en cabina Cambio físico entre el asiento izquierdo y derecho Firmware Compatible con actualizaciones de firmware en línea Soporte Soporte ajustable con múltiples ángulos Formato Diseño delgado y ultrafino Longitud 33 cm Altura 24 cm Anchura 10 cm Peso 1.25 kg Familias de simuladores compatibles Microsoft Flight Simulator, X-Plane 11/12 y Prepar3D Compatibilidad del Wingflex B777 CDU Plataforma Aeronaves compatibles Microsoft Flight Simulator PMDG 737NG 600, 700, 800 y 900; PMDG 777-300ER, 777-200ER y 777-200F; iFly 737 MAX X-Plane 11/12 Zibo 737NG, LevelUp 737NG e IXEG 737-300 Classic Prepar3D PMDG 777, PMDG 737NGXu, PMDG 747 V2, iFly 737NG e iFly 737 MAX El CDU se conecta mediante una interfaz USB e integra su pantalla, teclado retroiluminado y controles de selección de asiento en una única unidad. Su selector físico entre la posición del comandante y la del primer oficial permite utilizar un solo dispositivo para cualquiera de las dos posiciones del CDU, mientras que el soporte de escritorio ajustable con múltiples ángulos facilita diferentes opciones de instalación. No se especifica un patrón de montaje estándar para cockpits ni compatibilidad directa con estructuras CDU de terceros, por lo que una instalación permanente puede requerir un soporte o estante personalizado. La integración de software incluye aeronaves de PMDG, iFly, Zibo, LevelUp e IXEG, incluidas determinadas versiones de los Boeing 737, 747 y 777. El diseño del B777 está naturalmente optimizado para las operaciones con el PMDG 777, aunque el software compatible del 737 también puede comunicarse con la unidad. Las aeronaves no incluidas en la tabla oficial de compatibilidad, las implementaciones genéricas de FMC y los paquetes Airbus no relacionados no deben considerarse compatibles únicamente por utilizar una interfaz de gestión de vuelo similar. En cuanto a plataformas de simulación, el CDU es compatible con Microsoft Flight Simulator para PC, X-Plane 11 y 12 y Prepar3D cuando se utiliza con una de las aeronaves compatibles indicadas. Vídeos de análisis independientes demuestran su funcionamiento tanto en Microsoft Flight Simulator 2020 como en Microsoft Flight Simulator 2024. Se trata de un periférico USB diseñado para PC y no figura como compatible con Xbox ni PlayStation, por lo que las versiones para consola de Microsoft Flight Simulator quedan fuera de su compatibilidad oficial.

Leer Más Menos

The RealSimGear - Desktop Stand for RealSimGear GTN650 delivers a solid and ergonomic foundation for your GTN650. Crafted from 3mm steel with a durable powder-coated matte black finish, it offers both sturdiness and style. Its rubber non-slip feet ensure stability during use, while its mounting holes provide compatibility with systems like Honeycomb Alpha, Bravo, and Saitek/Logitech yokes. This stand is a game-changer for anyone looking to create a reliable and clean cockpit setup for their simulation adventures. RealSimGear - Desktop Stand for RealSimGear GTN650 apart? Durable Steel Construction Constructed from 3mm steel and finished with a powder-coated matte black surface, the stand resists wear and adds a sleek touch to your setup. Its robust design ensures it can handle the demands of regular use without wobbling or bending. Non-Slip Stability The stand features rubber non-slip feet, which keep it securely anchored on your desk. This design minimizes movement during use, even during intensive flight simulations, giving you peace of mind. Versatile Mounting Compatibility With pre-drilled holes, the stand is compatible with the Honeycomb Alpha and Bravo systems, Saitek/Logitech yokes, and the RealSimGear Flight Deck Mounting Plate. This versatility makes it an excellent choice for a variety of setups. Compact and Practical Design The stand elevates the GTN650 to an ergonomic viewing angle while maintaining a minimal footprint. It keeps your workspace organized and avoids unnecessary bulk, perfect for streamlined cockpit environments. Pros and Cons Pros Cons Durable 3mm steel construction with powder-coated finish. Only compatible with the RealSimGear GTN650. Rubber feet provide excellent non-slip stability. Does not include additional mounting hardware. Compatible with multiple mounting systems. Specifications Specification Value Material 3mm steel Finish Powder-coated matte black Foot Type Rubber non-slip feet Mounting Holes Compatible with Honeycomb Alpha/Bravo, Saitek/Logitech yoke, RealSimGear Flight Deck RealSimGear - Desktop Stand for RealSimGear GTN650 Compatibility The RealSimGear - Desktop Stand for RealSimGear GTN650 is specifically designed for the GTN650, ensuring a secure and elevated position for this device. It is equipped with mounting holes that support systems like the Honeycomb Alpha and Bravo, as well as Saitek/Logitech yokes, and the RealSimGear Flight Deck Mounting Plate. However, it is not suitable for devices outside this ecosystem, which makes it a dedicated choice for GTN650 users. This stand integrates seamlessly with PC-based flight simulation setups and complements platforms like Microsoft Flight Simulator and X-Plane. However, it is not designed for console compatibility, ensuring it focuses solely on delivering an optimized experience for PC-based flight simulation enthusiasts.

Leer Más Menos

The RealSimGear - Dual Desktop Stand for RealSimGear G5 brings durability and versatility to your flight simulation setup. Crafted from rugged 3mm powder-coated steel, this stand elevates and securely holds two G5 units, ensuring they remain stable throughout your sessions. With rubber non-slip feet and precise mounting compatibility, it offers an ergonomic and reliable way to configure your instruments, echoing the setup of real-world aviation cockpits for an unparalleled training and simulation experience. What sets the RealSimGear - Dual Desktop Stand for RealSimGear G5 apart? Designed for Dual G5 Units This stand is specifically built to house two G5 units, making it ideal for setups requiring both a Primary Flight Display (PFD) and Horizontal Situation Indicator (HSI). The design ensures seamless integration and proper spacing, allowing users to recreate the layout found in many aircraft panels. Rugged Build Quality Made from 3mm powder-coated steel, the stand offers exceptional durability. Its matte black finish resists wear while complementing the sleek aesthetics of modern simulation setups, ensuring it lasts through countless hours of use. Ergonomic Placement The elevated positioning provided by this stand reduces strain during long sessions and ensures easy access to both G5 units. Its thoughtful design mirrors real cockpit configurations, enhancing the practicality of your setup. Flexible Mounting Compatibility With pre-drilled holes compatible with RealSimGear Flight Deck Mounting Plate, Saitek/Logitech yoke systems, and Honeycomb Alpha and Bravo controls, this stand integrates effortlessly into most flight sim configurations, reducing the need for additional mounting hardware. Pros and Cons Pros Cons Securely holds two G5 units for cohesive setups. Not designed for single-unit configurations. Durable steel construction with a matte black finish. Limited to desk-mounted applications. Compatible with multiple popular mounting systems. Specifications Specification Value Material 3mm steel Finish Powder-coated matte black Features Non-slip rubber feet, mounting screws Capacity Holds 2 x RealSimGear G5 units Mounting Compatibility Flight Deck Plate, Saitek/Logitech, Honeycomb Alpha/Bravo RealSimGear - Dual Desktop Stand for RealSimGear G5 Compatibility The RealSimGear - Dual Desktop Stand for RealSimGear G5 is purpose-built to accommodate two G5 units, making it perfect for those using a PFD/HSI setup. It features mounting holes that align with the RealSimGear Flight Deck Mounting Plate, Saitek/Logitech yoke systems, and Honeycomb Alpha and Bravo controls. This ensures seamless integration with popular hardware configurations while maintaining a stable and ergonomic layout. The stand is optimized for PC-based simulation setups and supports platforms like X-Plane and Microsoft Flight Simulator. However, it does not directly support console-based gaming systems, focusing instead on professional and enthusiast PC configurations. Its compatibility ensures a plug-and-play experience with well-known flight simulation software.

Leer Más Menos

The RealSimGear Desktop Stand for G500 is an elegant and functional solution for flight sim enthusiasts seeking a secure mount for their G500 avionics. Made from durable 3mm powder-coated steel, it combines strength with a sleek matte black finish. Its rubber non-slip feet ensure stability even during the most intense maneuvers. Compatible with popular mounting systems and yokes, this stand provides an elevated, ergonomic position for your hardware, enhancing your overall flight simulation experience. What sets the RealSimGear Desktop Stand for G500 apart? Durable Steel Construction Crafted from 3mm steel with a powder-coated finish, this stand resists wear and tear while maintaining a refined look. It's built to last, providing a dependable foundation for the G500 and other compatible hardware. Non-Slip Stability The rubberized feet prevent sliding, offering a secure hold even during high-torque adjustments or enthusiastic use. This feature keeps your setup stable and in place without requiring constant adjustments. Versatile Mounting Options Its base accommodates various mounting systems, including the RealSimGear Flight Deck Mounting Plate, Saitek/Logitech yoke systems, and Honeycomb Alpha and Bravo products. This flexibility makes it an excellent choice for multi-device setups. Optimized Ergonomics The elevated design positions your G500 at a comfortable viewing angle, reducing strain and enhancing your control experience. The design ensures you can access your controls effortlessly during flights. Pros and Cons Pros Cons Sturdy 3mm steel construction ensures durability. Limited to desk-mounted setups. Rubberized feet provide exceptional stability. Powder-coated surface may show scratches over time. Compatible with multiple yoke and mounting systems. Elevated design improves viewing and accessibility. Specifications Specification Value Material 3mm steel Finish Powder-coated matte black Features Non-slip rubber feet, mounting screws Compatibility RealSimGear Flight Deck Mounting Plate, Saitek/Logitech, Honeycomb Alpha & Bravo RealSimGear Desktop Stand for G500 Compatibility The RealSimGear Desktop Stand for G500 is designed to fit a range of flight simulation setups seamlessly. It supports the RealSimGear Flight Deck Mounting Plate and is fully compatible with Saitek/Logitech yoke systems, Honeycomb Alpha yoke, and Honeycomb Bravo throttle quadrants. This flexibility ensures it can integrate into diverse configurations, catering to a broad spectrum of flight sim enthusiasts. While its compatibility with dedicated flight hardware is excellent, the stand is limited to desk-mounted applications and does not directly support gaming consoles. However, its universal design allows it to adapt to most PC-based setups, making it a versatile and practical choice for users running flight sims on Windows or other desktop platforms.

Leer Más Menos

The RealSimGear Desktop Stand for GTN750 & GTN650 is a purpose-built solution for flight simulation enthusiasts looking to stabilize and showcase their avionics. Constructed from durable 3mm powder-coated steel, it combines strength with a sleek matte black finish. The rubber non-slip feet and mounting screws ensure a firm grip, even during intense sim sessions. Designed for the GTN750 and GTN650, it provides an elevated, ergonomic platform that enhances usability and keeps your setup organized and functional. What sets the RealSimGear Desktop Stand for GTN750 & GTN650 apart? Sturdy and Sleek Build Made from 3mm powder-coated steel, this stand combines durability with a stylish matte black finish. It resists scratches and wear, ensuring a lasting, polished appearance that fits seamlessly into your sim rig. Enhanced Stability Equipped with rubber non-slip feet, the stand stays firmly in place during even the most demanding simulation sessions. This feature minimizes vibration and movement, giving you peace of mind while focusing on your flight. Wide Compatibility The mounting holes are designed to accommodate a range of systems, including the RealSimGear Flight Deck Mounting Plate, Saitek/Logitech yoke systems, and Honeycomb Alpha and Bravo yokes. This versatility makes it an excellent choice for users with multi-brand setups. Ergonomic Positioning The elevated design of the stand places your GTN750 and GTN650 at an optimal height and angle, reducing strain and making controls more accessible. It’s all about improving the functionality and comfort of your setup. Pros and Cons Pros Cons Sturdy 3mm steel construction for lasting durability. Limited to desk-mounted setups only. Rubber feet prevent sliding during intense use. Not ideal for portable or travel use. Compatible with multiple yoke and mounting systems. Specifications Specification Value Material 3mm steel Finish Powder-coated matte black Features Non-slip rubber feet, mounting screws Compatibility RealSimGear Flight Deck Mounting Plate, Saitek/Logitech, Honeycomb Alpha & Bravo RealSimGear Desktop Stand for GTN750 & GTN650 Compatibility The RealSimGear Desktop Stand for GTN750 & GTN650 is designed with versatility in mind, supporting various mounting systems and hardware configurations. It is fully compatible with the RealSimGear Flight Deck Mounting Plate, as well as Saitek/Logitech yoke systems and Honeycomb Alpha and Bravo yokes. This flexibility makes it a reliable choice for users running mixed-brand hardware in their simulation setups. While it excels with PC-based simulation systems, this stand is not compatible with console-based setups. Its design caters primarily to desktop users, offering stability and integration with popular flight simulation platforms. For gamers using titles like Microsoft Flight Simulator or X-Plane, the stand provides a functional and ergonomic mounting solution, further enhancing their sim rig's performance.

Leer Más Menos